FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 202 (Instrument Panel System Displays, Gauges And Console) › Repair Instructions › Multifunction Alarm Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster trim panel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala)  or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) .
  2. Remove the screws from the radio delete plate.
  3. Remove the radio delete plate from the instrument panel.
    4. Fig 1: Radio Delete Plate & Screws
    GM697548Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector from the multifunction alarm module.
    5. Fig 2: Multifunction Alarm Module & Electrical Connector
    GM697546Courtesy of GENERAL MOTORS CORP.
  5. Remove the multifunction alarm module from the instrument panel by lifting up and out.
About FixVault