FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 254 (Cellular Communication System) › Repair Instructions › Bracket Replacement - Vehicle Location Antenna Module › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  2. Remove the vehicle location antenna module bracket bolts (3, 4, 5).
    3. Fig 1: View Of Vehicle Location Antenna Module Bracket Bolts
    GM1204600Courtesy of GENERAL MOTORS CORP.
  3. Remove the communication interface module screws.
  4. Lower the communication interface module to the floor.
  5. Remove the vehicle location antenna module bracket.
    6. Fig 2: View Of Antenna Module Bracket
    GM1202535Courtesy of GENERAL MOTORS CORP.
About FixVault