FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 254 (Cellular Communication System) › Repair Instructions › Coaxial Cable Replacement - Cellular Telephone › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the I/P antenna cable to the communication interface module by pushing on the square plastic housing.
    2. Fig 1: View Of Communication Interface Module Electrical Connectors
    GM1204602Courtesy of GENERAL MOTORS CORP.
  2. Route the I/P antenna cable along the I/P harness.
  3. Secure the I/P antenna cable to the I/P harness.
  4. Route the body antenna cable behind the I/P bracket.
  5. Connect the body antenna cable to the I/P antenna cable.
    6. Fig 2: View Of I/P Mobile Telephone Antenna Cable
    GM1230646Courtesy of GENERAL MOTORS CORP.
  6. Install the carpet.
  7. Install the right front carpet retainer. Refer to Carpet Retainer Replacement - Front in Interior Trim.
  8. Install the right I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
  9. Install the body antenna cable to the inner roof panel and the windshield pillar.
    10. Fig 3: View Of Telephone Antenna Cable At Inner Roof Panel & Right Windshield Pillar
    GM907807Courtesy of GENERAL MOTORS CORP.
  10. Connect the antenna base lead.
  11. Install the headliner. Refer to Trim Panel Replacement - Side Front Door in Interior Trim.
  12. Install the garnish molding to the right windshield pillar. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
About FixVault