FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 259 (Stationary Window System) › Repair Instructions › Ambient Air Temperature Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the hood.
  2. Remove the push-in retainers (1) from the hood latch closeout panel.
    3. Fig 1: Push-In Retainers & Hood Latch Closeout Panel
    GM1228690Courtesy of GENERAL MOTORS CORP.
  3. Remove the hood latch closeout panel from the vehicle.
    4. Fig 2: View Of Hood Latch Closeout Panel
    GM1228692Courtesy of GENERAL MOTORS CORP.
  4. Access the outside air temperature sensor through the hood latch opening.
  5. Pull the outside air temperature sensor from the radiator air baffle.
    6. Fig 3: View Of Ambient Air Temperature Sensor
    GM1228352Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the sensor.
  7. Remove the sensor from the vehicle.
About FixVault