FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 261 (Lighting Systems) › Repair Instructions › License Lamp/Backup Lamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear compartment.
  2. Remove the license/backup lamp nuts (1) from the lamp.
  3. Disconnect the license/backup lamp electrical connector (2).
  4. Remove the license/backup lamp (3) from the rear compartment lid.
    5. Fig 1: License/Backup Lamp Nuts, Electrical Connector & Lamp
    GM1230529Courtesy of GENERAL MOTORS CORP.
  5. Remove the license/backup lamp electrical harness, if required.
    6. Fig 2: License/Backup Lamp Electrical Harness
    GM1230534Courtesy of GENERAL MOTORS CORP.
About FixVault