FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lock rod guide block (1) to the door.
  2. Install the inside handle rod to the lock rod guide block (1) by pushing inward to secure the rod into the lock rod guide block.
  3. Fig 1: Handle Lock Rod Guide Block
    GM794020Courtesy of GENERAL MOTORS CORP.
  4. Inspect the door for proper operation.
  5. Install the front or rear door trim panel. Refer to Trim Panel Replacement - Side Front Door  or Trim Panel Replacement - Side Rear Door .