FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 262 (Door System, Mirror System & Window System) › Repair Instructions › Handle Lock Rod Guide Block Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: This procedure covers the removal and installation of the front and the rear door.
  1. Remove the front or rear door trim panel Refer to Trim Panel Replacement - Side Front Door  or Trim Panel Replacement - Side Rear Door .
  2. Pull the rod (2) upward until it releases from the lock rod guide block (1).
    3. Fig 1: Handle Lock Rod Guide Block
    GM794020Courtesy of GENERAL MOTORS CORP.
  3. Remove the lock rod guide block (1) from the door.
About FixVault