FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 274 (Engine Controls (Introduction) - 3.8L) › Repair Instructions › Fuel Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel level sensor (5) to the fuel sender assembly.
    2. Fig 1: Fuel Pump & Sender Assembly Component View
    GM50636Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel level sensor electrical connector.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
About FixVault