FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 281 (Theft Deterrent System) › Repair Instructions › LED Indicator Replacement - Vehicle Security System › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the theft LED to the electrical connector. Align the theft LED to the opening in the trim panel. Rotate the theft LED.
    2. Fig 1: View Of Electrical Connector & Theft LED
    GM929254Courtesy of GENERAL MOTORS CORP.
  2. Align the I/P upper trim panel to the I/P trim pad. Press the retainers into the openings. Make sure that the wiring harness will not be pinched when the trim panel is installed.
    3. Fig 2: View Of Theft LED
    GM928779Courtesy of GENERAL MOTORS CORP.
  3. Install the garnish moldings to the right and the left windshield pillars. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
About FixVault