FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 330 (Steering Wheel And Steering Column) › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Lower And Upper Steering Column Covers
    GM328807Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper and lower steering column trim covers. Refer to Steering Column Trim Covers Replacement (Telescoping)  or Steering Column Trim Covers Replacement (Manual) .
    2. Fig 2: Wire Harness Straps & Steering Column Tilt Head Assembly
    GM323835Courtesy of GENERAL MOTORS CORP.
  2. Remove the wire harness straps (2) from the steering column tilt head assembly (1) and the column.
    3. Fig 3: Wire Harness Assembly & Wire Harness Strap
    GM323836Courtesy of GENERAL MOTORS CORP.
  3. Remove the wire harness assembly (1) from the wire harness strap (2).
    4. Fig 4: 2 Pan Head Tapping Screws
    GM323837Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 pan head tapping screws (1).
    5. Fig 5: Multifunction Turn Signal Switch Assembly
    GM323838Courtesy of GENERAL MOTORS CORP.
  5. Remove the multifunction turn signal switch assembly (1).
About FixVault