Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Fog Lamp Socket At Rear Fog Lamp Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the tail/turn signal lamp. Refer to Tail/Turn Signal Lamp Replacement (Europe, Japan) .
Remove the rear fog lamp socket from the rear fog lamp assembly.
Access the rear fog lamp through the tail lamp opening.

Fig 2: Rear Fog Lamp Bezel At Lamp Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the rear fog lamp bezel retaining nut and support the lamp assembly.
Remove the bezel from the lamp.
Lift the bezel off of the stud and pivot it out of the slot on the lamp.
Remove the rear fog lamp assembly.