FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 331 (Lighting Systems) › Repair Instructions › Stop Lamp Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lower Trim Panel & Stop Lamp Switch Connectors
    GM63971Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (IP) lower trim panel. Refer to Trim Panel Replacement - Knee Bolster in Instrument Panel, Gages, and Console.
  2. Disconnect the stop lamp switch connectors.
    3. Fig 2: Stop Lamp Switch
    GM63977Courtesy of GENERAL MOTORS CORP.
  3. Remove the stop lamp switch.
About FixVault