Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tail Lamp At Fascia To Tail Lamp Socket

Courtesy of GENERAL MOTORS CORP.

Install the bulb to the tail lamp socket, if replacing the bulb.
Install the socket to the tail lamp assembly.
Position the tail lamp assembly to the rear fascia.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws retaining the taillamp to the rear fascia.
Tighten: Tighten the tail lamp retaining screws to 2 N.m (18 lb in).