FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 331 (Lighting Systems) › Repair Instructions › Underhood Lamp Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector To Underhood Lamp Assembly
    GM64676Courtesy of GENERAL MOTORS CORP.
  1. Position the underhood lamp to the hood.
  2. Rivet the lamp to the hood.
  3. Connect the electrical connector to the lamp.
  4. Close the hood.
About FixVault