Fastener Tightening Specifications

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Clutch Actuator Cylinder Mounting Bolts	12 N.m	106 lb in
Clutch Pedal Bracket Mounting Nuts	27 N.m	20 lb ft
Clutch Pedal Nut	50 N.m	37 lb ft
Clutch Pressure Plate Bolts¹	70 N.m	52 lb ft
Cruise Control Release Switch Bracket Retaining Bolts	12 N.m	106 lb in
Driver Foot Rest Bracket Retaining Bolt	8 N.m	71 lb in
Driver Foot Rest Bracket Retaining Nut	10 N.m	89 lb in
Engine Flywheel Inspection Cover Retaining Bolts	25 N.m	18 lb ft
Negative Battery Cable Bolt	15 N.m	11 lb ft
¹ Clutch pressure plate bolts must be tightened in sequence and in even increments over three passes, then tightened to final specification on the fourth pass.