FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 337 (Door System, Mirror System & Window System) › Repair Instructions › Pull Handle Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Door Trim Panel & Handle Bracket
    GM63820Courtesy of GENERAL MOTORS CORP.
  1. Position the pull handle to the door trim panel.
  2. Install the screws through the bracket (1) to the pull handle.
  3. Install the door trim panel. Refer to Trim Panel Replacement - Door .
About FixVault