Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lock pillar retainer.
Tighten: Tighten the lock pillar weatherstrip retainer screws to 3 N.m (27 lb in).
- Apply a 6 mm (0.25 in) x 100 mm (4 in) bead of sealer across the lower edge of the retainer and onto the lock pillar.
- Install the weatherstrip. Refer to Weatherstrip Replacement (Coupe and Convertible) or Weatherstrip Replacement (Hardtop) in Stationary Windows.
NOTE:
Refer to Fastener Notice in Cautions and Notices.