FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 363 (Engine Cooling System -- 5.7L) › Repair Instructions › Radiator Support Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radiator Support Engine Wiring Harness
    GM673464Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow sensor electrical connector.
  2. Remove the engine wiring harness from the clip on the radiator support.
    3. Fig 2: Air Cleaner Intake Duct
    GM179304Courtesy of GENERAL MOTORS CORP.
  3. Remove the air cleaner intake duct.
    4. Fig 3: Radiator Upper Support & Bolts
    GM64027Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Note the position of the radiator upper support in relationship to the fan shroud. This must be reassembled correctly in order to retain the fan shroud.
  4. Remove the radiator support bolts.
  5. Remove the radiator support.
About FixVault