FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 89 (Bumper System) › Repair Instructions › Energy Absorber Replacement - Front › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia. Refer to FASCIA REPLACEMENT - FRONT BUMPER  . 
  2. Remove the energy absorber bolts and spacers.
  3. Remove the energy absorber.
    Fig 1: Front Energy Absorber
    G01450927Courtesy of GENERAL MOTORS CORP.
About FixVault