FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 99 (Seat System) › Repair Instructions › Seat Back Frame Replacement - Front › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat assembly from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
  3. Remove the front seat back. Refer to Seat Back Replacement - Front .
  4. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  5. Remove the front seat back panel. Refer to Seat Back Panel Replacement - Front .
  6. Remove the lumbar assembly. Refer to Lumbar Replacement - Front Seat .
  7. Remove the seat belt and retractor assembly. Refer to Seat Belt Replacement - Front .
    8. Fig 1: Locating Inflatable Side Impact Module To Seat Back Frame Screws
    GM753528Courtesy of GENERAL MOTORS CORP.
  8. Remove 2 screws (1) securing the inflatable side impact module to the seat back frame.
    9. Fig 2: Locating Side Impact Module Tub To Seat Back Frame Push Pins
    GM753530Courtesy of GENERAL MOTORS CORP.
  9. Remove the 2 push pins (1) securing the side impact module tub to the seat back frame.
    10. Fig 3: Identifying Lumbar & SIR Wiring At Seat Back Frame
    GM753527Courtesy of GENERAL MOTORS CORP.
  10. Remove the SIR wiring harness (1) from the seat back frame.
  11. Remove the lumbar wiring harness (3) from the seat back frame.
  12. Remove the wiring harness clips (2) from the seat back frame.
About FixVault