FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pulley Replacement (LA1) › Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
    IMPORTANT:
    • Ensure that the face of the pulley hub is flush with the end of the pump shaft.
    • Do not use the arbor press to install the pulley.
  1. Use the J 25033-C  in order to install the power steering pump pulley.
  2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement (LA1 )  or Power Steering Pump Replacement (LY7) .
About FixVault