FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Remote PS Fluid Reservoir Bracket Replacement (LY7) › Installation Procedure

Installation Procedure

  1. Install the power steering reservoir bracket to the power steering reservoir.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Identifying Power Steering Reservoir Bracket Bolts
    GM1386753Courtesy of GENERAL MOTORS CORP.
  2. Install the power steering reservoir bracket bolts.

    Tighten:  Tighten the power steering reservoir bracket bolts to 6 N.m (5 lb ft).

  3. Install the power steering reservoir to the vehicle. Refer to Remote Power Steering Fluid Reservoir Replacement (LY7) .
About FixVault