FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Air Compressor Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating ALC Shield Bolt
    GM898568Courtesy of GENERAL MOTORS CORP.
  1. Install the ALC shield (2) onto the vehicle.
  2. Install the ALC shield bolt (1) and retainers to the vehicle.

    Tighten:  Tighten the bolts to 6 N.m (53 in lb).

  3. Install the ALC compressor assembly onto the vehicle. Refer to Air Compressor Replacement .
  4. Lower the vehicle.
About FixVault