FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Air Tube Replacement › Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the air tube from the left rear shock absorber.
    Fig 1: Identifying Air Tubes Connected To Shock Absorbers
    GM517949Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the left rear air tube from the tee connector and remove from the vehicle.
  4. Disconnect the air tube from the right rear shock absorber.
  5. Disconnect the right rear air tube from the tee connector.
  6. Remove the air tube from the routing clips and from the vehicle.
About FixVault