FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Air Dryer Replacement › Installation Procedure

Installation Procedure

    Fig 1: Aligning Air Dryer For Removal/Installation
    GM865408Courtesy of GENERAL MOTORS CORP.
  1. Install the air dryer (1) to the compressor.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 2: Automatic Level Control Air Dryer Mounting Screw
    GM865588Courtesy of GENERAL MOTORS CORP.
  2. Install the air dryer mounting screw (1).

    Tighten:  Tighten the screw to 6 N.m (53 lb in).

    3. Fig 3: Air Dryer Hose
    GM865404Courtesy of GENERAL MOTORS CORP.
  3. Install the hose (1) onto the air dryer (2).
  4. Lower the vehicle.
About FixVault