FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Relay Replacement › Installation Procedure

Installation Procedure

    Fig 1: Automatic Level Control Relay
    GM865399Courtesy of GENERAL MOTORS CORP.
  1. Install the relay (1) to the compressor assembly.
    2. Fig 2: Locating Relay Bolt
    GM865435Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the relay nut (1) to the bracket.

    Tighten:  Tighten nut to 6 N.m (53 lb in)

    3. Fig 3: Automatic Level Control Relay Electrical Connector
    GM873334Courtesy of GENERAL MOTORS CORP.
  3. Install the electrical connector (1) to the relay (2).
  4. Lower the vehicle.
About FixVault