FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Relay Replacement › Removal Procedure

Removal Procedure

  1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Automatic Level Control Relay Electrical Connector
    GM873334Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1) from the relay (2).
    3. Fig 2: Locating Relay Bolt
    GM865435Courtesy of GENERAL MOTORS CORP.
  3. Remove the relay bolt (1) from the bracket.
    4. Fig 3: Automatic Level Control Relay
    GM865399Courtesy of GENERAL MOTORS CORP.
  4. Remove the relay (1) from the compressor assembly.
About FixVault