FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Lower Ball Joint Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Lower Ball Joint
    GM385752Courtesy of GENERAL MOTORS CORP.
  1. Install the ball joint to the lower control arm.
    2. Fig 2: Identifying Ball Joint Retaining Nuts
    GM385756Courtesy of GENERAL MOTORS CORP.
  2. Install the new ball joint bolts facing downward, away from the ball stud.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the new ball joint retaining nuts.

    Tighten:  Tighten the ball joint retaining nuts to 68 N.m (50 lb ft).

  4. Install the lower control arm. Refer to Lower Control Arm Replacement .
  5. Install the tire and wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
  7. Align the front suspension. Refer to Measuring Wheel Alignment in Wheel Alignment.
About FixVault