FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Stabilizer Shaft Link Replacement › Installation Procedure

Installation Procedure

  1. Use a pry bar in order to install the stabilizer shaft link insulators and the spacer.
    2. Fig 1: View Of Stabilizer Shaft Link Bolt And Nut
    GM623048Courtesy of GENERAL MOTORS CORP.
  2. Install the stabilizer shaft link and insulators.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the stabilizer shaft link bolt and nut.

    Tighten:  Tighten the stabilizer shaft link nut to 23 N.m (17 lb ft).

  4. Lower the vehicle.
About FixVault