FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - 4T65-E (Introduction, Service & Replacement) › Repair Instructions › Pressure Control Solenoid (PCS) Replacement › Removal Procedure

Removal Procedure

  1. Remove the case side cover. Refer to Case Side Cover Replacement 
  2. Disconnect the transaxle wiring harness.
    3. Fig 1: View Of Pressure Control Solenoid (PCS) Assembly
    GM49378Courtesy of GENERAL MOTORS CORP.
  3. Remove the pressure control solenoid (322).
About FixVault