FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent System › Repair Instructions › LED Indicator Replacement - Vehicle Security System › Removal Procedure

Removal Procedure

  1. Remove the instrument panel upper trim. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
  2. Remove the security indicator lamp (3) from the instrument panel upper trim:
    1. Rotate the lamp counterclockwise to approximately 1/4 turn.
    2. Pull the lamp out.
    Fig 1: I/P Trim Panel Component View
    GM314813Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the security indicator lamp electrical connector from the security indicator lamp.
About FixVault