FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Seat Cushion Inner Trim Panel Replacement - Front › Installation Procedure

Installation Procedure

    Fig 1: View Of Front Seat Cushion Trim Panel
    GM631091Courtesy of GENERAL MOTORS CORP.
  1. Install the front seat cushion trim panel from the front bucket seat.
    2. Fig 2: Locating Front Seat Cushion Trim Panel Center Screw
    GM631294Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screw to the center of the front seat cushion trim panel.

    Tighten:  Tighten the front seat cushion trim panel center screw to 43 N.m (32 lb ft).

    3. Fig 3: Identifying Front Seat Cushion Trim Panel Front Screw
    GM626888Courtesy of GENERAL MOTORS CORP.
  3. Install the screw to the front of the front seat cushion trim panel.

    Tighten:  Tighten the front seat cushion trim panel front screw to 43 N.m (32 lb ft).

    4. Fig 4: View Of Front Seat Cushion Trim Panel Rear Screw
    GM626929Courtesy of GENERAL MOTORS CORP.
  4. Install the screw to the rear of the front seat cushion trim panel.

    Tighten:  Tighten the front seat cushion trim panel rear screw to 43 N.m (32 lb ft).

  5. Install the front bucket seat. Refer to Seat Replacement - Bucket .
About FixVault