FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Driver Information Center Switch Replacement (Aztek) › Installation Procedure

Installation Procedure

    Fig 1: Locating Driver Information Center Switch Electrical Connectors
    GM853292Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the switch.
    2. Fig 2: Installed Driver Information Center Switch
    GM853277Courtesy of GENERAL MOTORS CORP.
  2. Install the driver information center switch to the IP trim plate.
  3. Push the switch assembly to the IP trim plate until the assembly is fully seated.
About FixVault