Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of EBCM/BPMV

Courtesy of GENERAL MOTORS CORP.

Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the electronic brake control module (EBCM) from the vehicle. Refer to Brake Pressure Modulator Valve (BPMV) Replacement .

IMPORTANT: In the following service procedures, insert rubber plugs or caps on the exposed brake pipe fittings to prevent brake fluid loss and contamination.

Remove the left front brake pipe.

Fig 2: Locating Right Front Brake Pipe

Courtesy of GENERAL MOTORS CORP.

Remove the right front brake pipe.

Fig 3: Locating Rear Brake Pipe

Courtesy of GENERAL MOTORS CORP.

Remove the rear brake pipe.

Fig 4: Master Cylinder Brake Pipes

Courtesy of GENERAL MOTORS CORP.

Remove the brake pipe to the brake master cylinder.