FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 122 (HVAC Systems - Automatic) › Repair Instructions › Mode Actuator Replacement - Console › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Actuator Assembly
    GM284229Courtesy of GENERAL MOTORS CORP.
  1. Install the mode actuator.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the mode actuator.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  3. Install the air outlet duct to the console.
  4. Install the screw to the air outlet duct.

    Tighten:  Tighten the screw to 1.9 N.m (17 lb in).

  5. Install the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
About FixVault