FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 130 (Accessory Power Socket) › Repair Instructions › Accessory Power Receptacle Replacement - 12 Volt › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Positioning Accessory Power Receptacle Retaining Ring
    GM741514Courtesy of GENERAL MOTORS CORP.
  1. Position the retaining ring to the mounting hole.
  2. Index the key to the retaining ring to the slot in the mounting hole.
  3. Install the retaining ring by pressing the retaining ring into the mounting hole until fully seated.
    4. Fig 2: Connecting Accessory Power Receptacle Electrical Connector
    GM741510Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector to the socket.
    5. Fig 3: Positioning Accessory Power Receptacle To The Retaining Ring
    GM741512Courtesy of GENERAL MOTORS CORP.
  5. Position the socket to the retaining ring.
  6. Install the socket into the retaining ring by pressing in the socket until fully seated.
  7. Install the 12-volt power supply or cigar lighter fuse.
About FixVault