Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the assist step pad to the assist step, ensuring that the fasteners (2) are fully seated.
- Position the assist step to the vehicle.NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the nuts (1) that retain the assist step to the assist step support brackets.
Tighten: Tighten the nuts to 25 N.m (18 lb ft).
- Lower the vehicle. Refer to Lifting and Jacking the Vehicle .