Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Install the transfer case shield (2) to the transmission support. Ensure that the J-nuts (1) are in place.

Fig 1: Installing Transfer Case Shield
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the transfer case shield mounting bolts (3).
Tighten: Tighten the transfer case shield mounting bolts to 16 N.m (12 lb ft).
Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.