FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › External Pages › Different car › Section 63 (Front Suspension System) › Repair Instructions › Stabilizer Shaft Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the tire and wheel assemblies. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
  4. Remove the stabilizer shaft insulator clamps from the front crossmember.
  5. Remove the stabilizer shaft from the vehicle.
Fig 1: Removing Stabilizer Shaft
G01419366Courtesy of GENERAL MOTORS CORP.
About FixVault