FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Tilt Lever Replacement › Removal Procedure

Removal Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the lower trim cover. Refer to Steering Column Trim Covers Replacement .
  3. Remove the tilt lever spring.
  4. Remove the retaining bolt from the tilt lever.
    5. Fig 1: Locating Tilt Lever
    GM697350Courtesy of GENERAL MOTORS CORP.
  5. Remove the tilt lever.
About FixVault