FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Air Compressor Shield Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Lower the automatic level control (ALC). air compressor assembly. Refer to Air Compressor Replacement .
    3. Fig 1: Locating ALC Shield Bolt
    GM898568Courtesy of GENERAL MOTORS CORP.
  3. Remove the ALC shield bolt (1) and retainers.
  4. Remove the ALC shield (2) from the vehicle.
About FixVault