FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Air Dryer Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Air Dryer Hose
    GM865404Courtesy of GENERAL MOTORS CORP.
  2. Remove the hose (1) from the air dryer (2).
    3. Fig 2: Automatic Level Control Air Dryer Mounting Screw
    GM865588Courtesy of GENERAL MOTORS CORP.
  3. Remove the mounting screw (1).
    4. Fig 3: Aligning Air Dryer For Removal/Installation
    GM865408Courtesy of GENERAL MOTORS CORP.
  4. Rotate the air dryer (1) to remove from compressor.
About FixVault