FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Stabilizer Shaft Insulator Replacement › Installation Procedure

Installation Procedure

  1. Install the stabilizer shaft insulator.
    2. Fig 1: View Of Left And Right Stabilizer Shaft Insulators And Brackets
    GM623050Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the stabilizer shaft insulator locating tabs (3) align with the indentations in the frame (2).
  3. Install the left and right side stabilizer shaft insulator brackets.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the left and right side stabilizer shaft insulator bracket bolts.

    Tighten:  Tighten the stabilizer shaft insulator bracket bolts to 48 N.m (35 lb in).

  5. Install the front tires. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
About FixVault