FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - 4T65-E (Introduction, Service & Replacement) › Repair Instructions › Thermo Element Replacement › Removal Procedure

Removal Procedure

  1. Remove the oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: View Of Thermo Element & Plate
    GM164817Courtesy of GENERAL MOTORS CORP.
  2. Remove the thermo element pins and washers (120 and 123).
  3. Remove the thermo element (121) and the thermo element plate (122).
About FixVault