FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - 4T65-E - Overhaul › Repair Instructions › Driven Sprocket Support Components Disassemble › Disassembly Procedure

Disassembly Procedure

  1. Use J 4670-01  clutch spring compressor in order to compress the fourth clutch spring assembly (602). Remove the snap ring (601) from the driven sprocket support assembly.
    Fig 1: Using J 4670-01 To Compress The Fourth Clutch Spring Assembly
    GM10670Courtesy of GENERAL MOTORS CORP.
    2. Fig 2: Removing Spring Assembly & Fourth Clutch Piston Assembly
    GM10671Courtesy of GENERAL MOTORS CORP.
  2. Remove the spring assembly (602) and remove the fourth clutch piston assembly (603) from the driven sprocket support assembly (609).
    3. Fig 3: Locating Fourth Clutch Piston Outer Seal
    GM10672Courtesy of GENERAL MOTORS CORP.
  3. Remove the outer seal (604) from the fourth clutch piston (603).
    4. Fig 4: Removing Inner Seal & Oil Seal Rings From Driven Sprocket Support
    GM788713Courtesy of GENERAL MOTORS CORP.
  4. Remove the inner seal (605) for the fourth clutch piston from the driven sprocket support assembly hub.
  5. Remove the oil seal rings (613) from the driven sprocket support.
About FixVault