FixVault
Home › Pontiac › 2004 › Aztek Base, FWD › Repair and Diagnosis › Transmission › Transfer Case - STEYR › Repair Instructions › Vent Hose Assembly Replacement (LA1) › Installation Procedure

Installation Procedure

    Fig 1: View Of Transfer Case Hose/Clamp Assembly, Vent Hose, Bracket & Bolt
    GM630581Courtesy of GENERAL MOTORS CORP.
  1. Install the vent hose to the extension housing assembly vent tube.
  2. Connect the vent hose (2) to the retaining bracket on the transfer case assembly.
  3. Install the vent hose clamp (1) to the extension housing assembly.
  4. Lower the vehicle.
About FixVault