FixVault
Home › Pontiac › 2004 › Bonneville GXP › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) -- 4.6L (LD8) › Repair Instructions › Accelerator Controls Cable Bracket Replacement › Removal Procedure

Removal Procedure

    Fig 1: Accelerator Controls Cable, Bracket & Cruise Control Cable
    GM104766Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the cruise control cable (2) from the accelerator controls cable bracket (1).
  2. Disconnect the accelerator cable (3) from the accelerator controls cable bracket (1).
    3. Fig 2: Fuel Feed, Fuel Return, Fuel Pipes & Retainer
    GM130538Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the fuel feed (3) and fuel return (2) fuel pipes from the retainer (1).
    4. Fig 3: Transaxle Vent Hose & Accelerator Controls Cable Bracket
    GM154854Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the transaxle vent hose (2) clip from the accelerator controls cable bracket (1).
    5. Fig 4: Accelerator Controls Cable Bracket & Bolts
    GM573471Courtesy of GENERAL MOTORS CORP.
  5. Remove the upper throttle body bolt.
  6. Remove the bolts (2) from the accelerator controls cable bracket (3).
About FixVault