FixVault
Home › Pontiac › 2004 › Bonneville SLE › Repair and Diagnosis › Brakes › Antilock Brake System, Traction Control System & Stability Control System › Repair Instructions › Yaw Rate Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Yaw Rate Sensor
    GM492697Courtesy of GENERAL MOTORS CORP.
  1. Install the yaw rate sensor electrical connector (3).
  2. Install the yaw rate sensor to the mounting bracket.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the yaw rate sensor (2) nuts.

    Tighten:  Tighten the 2 yaw rate sensor mounting nuts (1) to 6 N.m (53 lb in).

  4. Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - ABS .
About FixVault