FixVault
Home › Pontiac › 2004 › Bonneville SLE › Repair and Diagnosis › General Information › Reset Procedures › Tire Pressure Monitor Systems › TPMS Reset Procedures › Tire Pressure Monitor System RECALIBRATION › Using Scan Tool

Using Scan Tool

  1. Turn ignition switch to OFF position.
  2. Ensure all tire pressures are adjusted to the pressure recommended on tire pressure label.
  3. Connect scan tool. Turn ignition switch to ON position, with engine off.
  4. Using scan tool, select "SPECIAL FUNCTIONS".
  5. Select "TIRE PRESSURE RESET".
  6. Press RESET soft key. On models with systems monitor, TIRE PRESS indicator will turn off. On models with DIC, display should read "TIRE PRESSURE NORMAL".
  7. If necessary, use scan tool to clear any TPM Diagnostic Trouble Codes (DTCs).
  8. After resetting, the TPM system requires driving in 3 speed ranges to complete calibration process. See Recalibration Driving Speed Ranges .
About FixVault