FixVault
Home › Pontiac › 2004 › GTO Automatic › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Powertrain Interface Module (PIM) Replacement › Removal Procedure

Removal Procedure

  1. Remove the accelerator and servo control module. Refer to Accelerator and Servo Control Module (ASM) Replacement in Antilock Brakes.
    2. Fig 1: View Of PIM Control Module & Electrical Connector
    GM1393388Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (2) from the PIM control module.
  3. Remove the powertrain interface module (PIM) control module (1) from the vehicle.
About FixVault